MG-SS Series Automatic Blow Molding machines

                    Brief Introduction

                    Mega Machinerys’ SS Series automatic linear PET blow moulding machines was designed with two principles in mind. One, to lower the running cost for the bottle producer and two, provide easy operation. The MG-SS Series PET blow moulding machines lowers your production costs so you can achieve maximum profits in your competitive bottling market, the MG-SS series blower reduces your energy expenses by up to 30% at a maximum output of 1500BPH for the signal cavity machine. Thanks to our GM Mr. Cai Yunsen who developed the patented process for spacing the performs which maximizes the performance of the MG-SS series PET blow moulding machine.

                    Overview

                    * PLC controller
                    MG-SS series PET blow moulding machines adopts the famous Delta controller system. It integrates a self-diagnosis program, all warning information is shown through the friendly touch interface featuring an alarm system. Also, the controller shows the actual blowing speed during production.

                    * Cast molded platen with toggle clamping unit
                    Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.

                    * Infrared heating system
                    A Zoned and layered heating system with an advanced venting unit keeps the temperature accurate and uniform, this is the key to manufacturing high quality plastic bottles. The lamps can also be adjusted horizontally and vertically inside the specially designed heating oven. This ensures the distribution of heat meets the different shapes of the preforms.

                    * Stretching system
                    A double cylinder stretching unit is standard equipment and ensures the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction coefficient.

                    * Patented perform spacing system
                    The patented perform spacing system sets the preform adapters 120mm apart at the blowing station by mechanical function and also improves the moving speed.

                    * Preform loading & bottle discharging system
                    Famous brand pneumatic parts guarantee the machines reliable performance and long service life while Linear motion guides improve the moving speed. Special grip units are designed to be changed easily.

                    Features

                    1. Full automatic running with theoretical output capacity up to 4500 bottles per hour for 0.1L volume using four-cavity blow mold
                    2. Patented loading system carries the preform automatically with less moving parts.
                    3. Suitable to produce 0.1 ~ 2.5L Standard neck PET container
                    4. Advanced PLC control system with a use-friendly control panel
                    5. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
                    6. Multiple Reliable sensor systems monitors the machine’s automatic function
                    7. Equipped with special designed air storage unit
                    8. Powerful heating unit with precision controller and convenient adjusting mechanism.
                    9. Cooling system that provides a perfect cooling result
                    10. Compact design that saves space
                    11. Simple installation & startup operation
                    12. minimal transfer space for the air distribution system.

                    Bottle SamplesPET bottles produced by SS series automatic reheat PET stretch blow molding machine:

                    CSD 3L

                    PET Jar-5L

                    Detergen 500ml PET bottle

                    pharmacal 50ml

                    Edible oil 4500ML

                    water bottle 1L

                    Specification

                    General InformationMG-SS2BFMG-SS3BFMG-SS4SFMG-SS4BF
                    Clamping Force35T35T35T60T
                    Clamping Stroke130mm130mm90mm130mm
                    Max. Stretching Stroke400mm400mm320mm400mm
                    Bottom Moving Stroke70mm70mm70mm70mm
                    Number of Cavities2 cavity3 cavity4 cavity4 cavity
                    Theoretical Output3000BPH4000BPH5200BPH4500BPH
                    Max. Mould Thickness300mm300mm200mm310mm
                    Electrical System
                    Voltage Standard380v/3PH/50Hzor special order
                    Number of Heating Zone2 Sections3 Sections4Sections4Sections
                    Total Power (Full Loaded) 35KW48KW48KW48KW
                    Container
                    Max. Container Volume2.5L2.5L0.75L2.25L
                    Neck Diameter Range32mm32mm32mm32mm
                    Max. Container Diameter110mm110mm73mm110mm
                    Max. Container Height350mm350mm220mm360mm
                    Air system
                    Low Air consumption8-10Bar8-10Bar8-10Bar8-10Bar
                    High Air consumption≤35 Bar≤35 Bar≤35 Bar≤35 Bar
                    Dimension & Weight
                    Blow molding machine3.37x2x2.2 m2.95×2.25×2.2m3.65×1.9×2.2m3.66×2.16x2m
                    Preform Autoloader2.1×1.3×2.55m2.4×1.4xx2.7m2.5×1.6×2.7m2.4×1.4×2.7m
                    Net Weight3T4T4T4.5T
                    General InformationMG-SS6SFTMG-SS6SFMG-SS6MFTMG-SS6MF
                    Clamping Force70T45T70T75T
                    Clamping Stroke90mm90mm120mm110mm
                    Max. Stretching Stroke320mm320mm350mm350mm
                    Bottom Moving Stroke70mm70mm70mm70mm
                    Number of Cavities6 cavity6 cavity6 cavity6 cavity
                    Theoretical Output7000 BPH9000BPH6700 BPH8200BPH
                    Max. Mould Thickness200mm200mm320mm250mm
                    Electrical System
                    Voltage Standard380v/3PH/50Hzor special order
                    Number of Heating Zone4 Sections6 Sections4 Sections8 Sections
                    Total Power (Full Loaded) 64 KW90KW96 KW120kw
                    Container
                    Max. Container Volume0.75L0.75L1.5L1.5L
                    Neck Diameter Range32mm32mm32mm38mm
                    Max. Container Diameter70mm70mm85mm105mm
                    Max. Container Height220mm220mm320mm280mm
                    Air system
                    Low Air consumption8-10Bar8-10Bar8-10Bar8-10Bar
                    High Air consumption30-35 Bar30-35 Bar30-35 Bar30-35 Bar
                    Dimension & Weight
                    Blow molding machine3.8x2x2.2m4.9×2.2×2.3m4.6×2.25×2.2m4.9×2.2×2.3m
                    Preform Autoloader3.4×1.6×3.3m2.5×1.8×2.7m3.4×1.6×3.3m2.5×1.8×2.7m
                    Net Weight7T8T8T9T
                    General InformationMG-SS6BFTMG-SS6BFMG-SS8SFMG-SS10SFMG-SS12SF
                    Clamping Force70T45T45T75T90T
                    Clamping Stroke130mm130mm90mm90mm110mm
                    Max. Stretching Stroke350mm370mm320mm320mm350mm
                    Bottom Moving Stroke70mm70mm70mm70mm70mm
                    Number of Cavities6 cavity6 cavity8 cavity10 cavity12 Cavity
                    Theoretical Output6500 BPH8000BPH12000BPH14000BPH16000 BPH
                    Max. Mould Thickness320mm250mm200mm200mm200mm
                    Electrical System
                    Voltage Standard380v/3PH/50Hzor special order
                    Number of Heating Zone4 Sections8 Sections6 Sections10 Sections12 Sections
                    Total Power (Full Loaded) 96 KW120kw100KW150KW170KW
                    Container
                    Max. Container Volume2.5L2.5L0.75L0.75L0.75L
                    Neck Diameter Range32mm38mm32mm32mm32mm
                    Max. Container Diameter110 mm85mm70mm70mm70mm
                    Max. Container Height360mm350mm220mm220mm280mm
                    Air system
                    Low Air consumption8-10Bar8-10Bar8-10Bar8-10Bar8-10Bar
                    High Air consumption30-35 Bar30-35 Bar30-35 Bar30-35 Bar30-35 Bar
                    Dimension & Weight
                    Blow molding machine5.6×2.25×2.2m5.6×2.1×2.3m5.4X2.1X2.3m6.4×2.1×2.3m_ _
                    Preform Autoloader3.4×1.6×3.3m2.5×1.8×2.7m2.5×1.8×2.7m2.5×1.8×2.7m_ _
                    Net Weight8T9T9T10T_ _

                    Mega Machinery, the Professional PET Blow Moulding Machine supplier in China.

                    Note: PET stretch blow molding machine is also known as Reheat stretch blow molding machines, Stretch blow molding machines, bottle blowing machine, blowing machines and PET blow molding machine.

                    欧美VIDEOSFREEGRANDMA